Consumer Light

SM-G06 Intelligent body sensing wireless magnetic suction

Short Description:

Material: Aluminum alloy lamp body, PC lamp shade, ABS plug

Auto Motion Sensor Closet Lights: Using PIR and light sensing technology, sensitive sensor effectively solving the problem of finding switches in the dark.


Product Detail

Product Tags

Product Specifications

Model

Dimension(mm)

Power

Battery Capacity

Luminous flux

SM-G06-12

120x24x19

0.4W

280mAh

24lm

SM-G06-22

220x24x19

0.9W

400mAh

54lm

SM-G06-32

320x24x19

1.2W

400mAh

72lm

SM-G06-52

520x24x19

1.5W

600mAh

90lm

Features[Product Features

· 4-Level Brightness Options: Olalits motion sensor under counter lights provides 4 level brightness, 25%- 50%- 75%- 100%. The lighting is not dazzling, soft and beautiful, the brightness could be adjusted by your needs, under cabinet lighting adds ambiance to a room, and practical lighting under counters and in other workspaces, tt can be widely used for kitchen cabinet wardrobes,counters, showcases, shelves, room decoration, etc.

· Auto Motion Sensor Closet Lights: Using PIR and light sensing technology, sensitive sensor effectively solving the problem of finding switches in the dark. The detection covers 10 ft, 120°range, it will automatically turn on when it detects movement at night or in dark, and it will turn off after 25S of no movement. NOTE: The counter lights will not turn on auto when in sufficient light. Considering energy-saving, it's better to turn off "AUTO" mode in daytime, or use the “ON” or "OFF" mode by your needs.

· USB-Type C Rechargeable Under Cabinet Lighting: The wireless magnetic under cabinet lights equip with a built-in 280-600mah battery, which could provide up to 1.5-3 hours continuously always-on after fully charged (using time up to brightness level). USB charge is convenient and easy to use anytime anywhere. NOTE: 2 hours of continuous lighting at maximum brightness, then cabinet lights will gradually dim when the battery power is low, so when this happens the lights could be removed to charge.

· Easy to Install: The counter light with built-in strong magnets on both ends is very easy to install by 2 ways. 1)Simple and direct mounted to any magnetic surface. 2)Fix the position first and peel off the adhesive tape on the back of the iron sheet, then stick on any flat surface you need. Or you can use screws to fix the magnet tapes flatly. And when need to charge just take off the light fixture from the magnetic sheet.The magnetic auto sensor light is very easy to install and remove.

Application Scenario

Cupboard, wardrobe, bedside, bedroom, desk


  • Previous:
  • Next: